Article successfully added.
Clamp meter up to 1,000 V AC, CAT IV

incl. 2x AAA batteries

THE testing Multitool for electricians.

Clamp meter up to 1,000 V AC, CAT IV
Clamp meter up to 1,000 V AC, CAT IV
Clamp meter up to 1,000 V AC, CAT IV
Clamp meter up to 1,000 V AC, CAT IV
Clamp meter up to 1,000 V AC, CAT IV
Clamp meter up to 1,000 V AC, CAT IV
Clamp meter up to 1,000 V AC, CAT IV
Clamp meter up to 1,000 V AC, CAT IV
Clamp meter up to 1,000 V AC, CAT IV
Clamp meter up to 1,000 V AC, CAT IV
Icon_400u-400_A Icon_1000V_AC_1500V_DC Icon_CAT_IV Icon_eMobility_1500V_DC Icon_Milli_Volt Icon_Solar_1500V_DC Icon_Ton Icon_True_RMS

Clamp meter up to 1,000 V AC, CAT IV

incl. 2x AAA batteries

THE testing Multitool for electricians.

Topseller
Voltage V DC min – max | Voltage V AC min – max [Order-No.]
Wish list
  • 45219

Product highlights

Suitable for eMobility
Suitable for eMobility
Suitable for eMobility
Suitable for photovoltaic systems
Suitable for photovoltaic systems
Suitable for photovoltaic systems
1,000 V AC / 1,500 V DC, 400 Amp
1,000 V AC / 1,500 V DC, 400 Amp
1,000 V AC / 1,500 V DC, 400 Amp
Cat IV, 1,000 V
Cat IV, 1,000 V
Cat IV, 1,000 V
Safe measuring without direct contact
Safe measuring without direct contact
Without electrical circuit interruption
Without electrical circuit interruption
Product description
When working, for example, on electrical systems that cannot be switched off, current measurement is a major challenge. With the measuring caliper from Wiha, the caliper bracket can be used to carry out measurements without interrupting the electrical circuit. Handling is greatly facilitated by the remote single-hand testing. The test tips allow additional tests, voltage measurement in the AC and DC range, as well as resistance, frequency, and capacity measurements. They also allow continuity and diode tests. This multi-functionality significantly increases the efficiency. A large LCD display with background illumination and data hold function makes the measurement results immediately readable even beyond the measurement process. An additional signal sound indicates the current flow during the continuity check. In addition, the measuring caliper from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments. The LPF function, coupled with the True-RMS function increase the process safety of your test by providing interference-free effective values. According to the measurement category CAT IV up to 1,000 V the measuring caliper offers maximum safety for working directly on the sources of low-voltage installations.
Dimensions
110 x 280 x 50 mm
Measuring category
CAT IV 1.000 V
Standards
IEC/EN 61010-1, IP40
Application
For multi-functional use in different application locations.
Available downloads:
  Clamp meter up to 1,000 V AC, CAT IV
Order-No. 45219
EAN 4010995452193
Voltage V DC min – max 0 - 1500
Voltage V AC min – max 0 - 1000
Current A DC 400 A DC
Current A AC 400 A AC
Resistance (MΩ) 40 MΩ
Integrated flashlight Yes
Frequency (MHz) 5 MHz
True RMS Yes
Background illumination Yes
Data HOLD Yes
Min. measurement Yes
Max. measurement Yes
Measuring category CAT IV 1,000 V
Remote voltage test Yes
with battery / rechargeable battery Yes
AVG measurement Yes
Continuity check < 30 Ω
Overall length (mm) 220
Capacity (μF) 100 μF