Article successfully added.
Single-pole, non-contact volt detector, 12–1,000 V AC

Includes two AAA batteries

Tracks the voltage.

Single-pole, non-contact volt detector, 12–1,000 V AC
Single-pole, non-contact volt detector, 12–1,000 V AC
Single-pole, non-contact volt detector, 12–1,000 V AC
Single-pole, non-contact volt detector, 12–1,000 V AC
Single-pole, non-contact volt detector, 12–1,000 V AC
Single-pole, non-contact volt detector, 12–1,000 V AC
Single-pole, non-contact volt detector, 12–1,000 V AC
Single-pole, non-contact volt detector, 12–1,000 V AC
Single-pole, non-contact volt detector, 12–1,000 V AC
Single-pole, non-contact volt detector, 12–1,000 V AC
Icon_12-1000V_AC Icon_Auto-Off Icon_Signal_Akustisch_OnOff Icon_Taschenlampen-Funktion

Single-pole, non-contact volt detector, 12–1,000 V AC

Includes two AAA batteries

Tracks the voltage.

Topseller
Voltage V AC min – max | Overall length (mm) [Order-No.]
Wish list
  • 43797

Product highlights

Voltage 12 - 1,000 V AC
Voltage 12 - 1,000 V AC
Voltage 12 - 1,000 V AC
5-level optical signal
5-level optical signal
Integrated flashlight function
Integrated flashlight function
Integrated flashlight function
Product description
Before starting electrical installation work, electricians need to guarantee that their work environment is free of any live voltage. A voltage tester is required to test alternating electric fields or probable sources of error. The contactless Wiha voltage tester will give an initial indication of whether an area is live or not thanks to an optical and audible signal. Once the tester is switched on, the permanently green LED indicates that the tester is ready for use. During the voltage test, the LEDs will light up blue (weak), orange, or red (strong), depending on the strength of the alternating electric field. Two AAA batteries are required to operate the device. These are included in the delivery. The device switches off automatically to save energy if it is not used for four minutes. An integrated flashlight allows the user to illuminate the measurement point in dark environments and can be switched off and on manually for use solely as a flashlight. With its push-on clip, the voltage tester snugly fits into any shirt or trouser pocket thanks to its handy size. The voltage tester is suitable for all socket variants worldwide thanks to its measurement tip suited to international usage. Designed for CAT IV 1,000 V AC, the single-pole voltage tester complies with EN 61010-1/IEC 61326. The voltage tester should be tested on a known voltage source before and after every use to ensure it functions correctly.
Measuring category
CAT IV 1.000 V
Standards
IEC/EN 61010-1, IEC/EN 61326, IP67
Application
Used to detect and locate live electrical cabling and wires, breaks and cable interruptions, blown fuses, defective light bulbs on light chains and single wires.
Available downloads:
  Single-pole, non-contact volt detector, 12–1,000 V AC
Order-No. 43797
EAN 4010995437978
Voltage V AC min – max 12 - 1000
Overall length (mm) 150
Battery type (IEC designation) 2x AAA batteries
Handle diameter (mm) 28,5
Remote voltage test Yes
ATEX approval No
Integrated flashlight Yes
Measuring category CAT IV 1,000 V
Protection class IP IP67
Operating temperature min - max (°C) -20 - 40
Acoustic signal Yes
Similar products
Voltage tester 120-250 volts Voltage tester 120-250 volts
Slotted transparent, with push-on clip in blister pack on SB-card
Voltage tester 150-250 volts Voltage tester 150-250 volts
Slotted black, with push-on clip in blister pack