Clamp meter up to 1,000 V AC, CAT IV

incl. 2x AAA batteries

THE testing Multitool for electricians.

Clamp meter up to 1,000 V AC, CAT IV

incl. 2x AAA batteries

THE testing Multitool for electricians.

Topseller

Voltage V DC min – max | Voltage V AC min – max [Order-No.]

Wish list

Order number: 45219

Product highlights

Suitable for eMobility

Suitable for photovoltaic systems

1,000 V AC / 1,500 V DC, 400 Amp

Cat IV, 1,000 V

Safe measuring without direct contact

Without electrical circuit interruption

Close menu

Product description: When working, for example, on electrical systems that cannot be switched off, current measurement is a major challenge. With the measuring caliper from Wiha, the caliper bracket can be used to carry out measurements without interrupting the electrical circuit. Handling is greatly facilitated by the remote single-hand testing. The test tips allow additional tests, voltage measurement in the AC and DC range, as well as resistance, frequency, and capacity measurements. They also allow continuity and diode tests. This multi-functionality significantly increases the efficiency. A large LCD display with background illumination and data hold function makes the measurement results immediately readable even beyond the measurement process. An additional signal sound indicates the current flow during the continuity check. In addition, the measuring caliper from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments. The LPF function, coupled with the True-RMS function increase the process safety of your test by providing interference-free effective values. According to the measurement category CAT IV up to 1,000 V the measuring caliper offers maximum safety for working directly on the sources of low-voltage installations.
Dimensions: 110 x 280 x 50 mm
Measuring category: CAT IV 1.000 V
Standards: IEC/EN 61010-1, IP40
Application: For multi-functional use in different application locations.

Available downloads:

BA_SB25551_Clamp_meter_1000_V-AC_CAT-IV_225x105mm_45219_INT_online.pdf

Close menu

	Clamp meter up to 1,000 V AC, CAT IV
Order-No.	45219
EAN	4010995452193
Voltage V DC min – max	0 - 1500
Voltage V AC min – max	0 - 1000
Current A DC	400 A DC
Current A AC	400 A AC
Resistance (MΩ)	40 MΩ
Integrated flashlight	Yes
Frequency (MHz)	5 MHz
True RMS	Yes
Background illumination	Yes
Data HOLD	Yes
Min. measurement	Yes
Max. measurement	Yes
Measuring category	CAT IV 1,000 V
Remote voltage test	Yes
with battery / rechargeable battery	Yes
AVG measurement	Yes
Continuity check	< 30 Ω
Overall length (mm)	220
Capacity (μF)	100 μF